Fiberlogy ABS, 1.75, 0.85Kg
£14.00
When it comes to a high-quality and high-demand filament, there is no name better known than Fiberlogy.
With Fiberlogy you get a plethora of options in a multitude of incredible tones.
What’s more than this, you also get that Fiberlogy finish
Description
| Material | ABS |
|---|---|
| Diameter | 1.75mm |
| Nozzle Temp | 220°C – 260°C |
| Tolerance | +/- 0.02mm |
| Filament Weight | 1kg |
| Abrasiveness | Nonabrasive |
| Print Surface | Material Properties | Bed Temp | Adhesives / Release Agents |
|---|---|---|---|
| Glass / Borosilicate Glass | Poor Adhesion | 80°C – 100°C | Magigoo Original recommended |
| Ceramic Glass | Poor Adhesion | 80°C – 100°C | Magigoo Original recommended |
| Textured PEI Glass | Good adhesion | 80°C – 100°C | Magigoo Original recommended |
| Smooth PEI Spring Steel Sheet | Poor Adhesion | 80°C – 100°C | Magigoo Original recommended |
| Textured PEI Spring Steel Sheet | Good adhesion | 80°C – 100°C | Magigoo Original recommended |
ASA and ABS can be smoothed with acetone vapor to provide a very smooth finish.
If ASA or ABS welds to your bed, you can use acetone to melt it off provided your print surface can take acetone.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
-
SOLD OUTFiberlogy BVOH, Soluble Support Material, 1.75mm, 0.5Kg.
£67.00Out of stock. Join the waitlist to be notified when this product becomes available.
Reviews
There are no reviews yet.