Fiberlogy ASA 1,75 mm 0,75 kg
£26.50 £38.52
Fiberlogy ASA is often referred to as the successor to ABS. Due to its exceptional resistance to UV radiation, high temperatures (up to 94°C) and humidity, it is perfect for printing models exposed to long-term weather conditions. At the same time, the material is very durable and simple to print.
Due to the fact that ASA is characterized by low shrinkage, high adhesion and less emission of unpleasant odours compared to ABS, it can be used in printers that are not fitted with a heated chamber.
Properties:
- high UV resistance
- high durability
- lasting colours
- resistance to temperatures up to 94°C
- possibility of finished model machining
- low odour emission compared to ABS
Description
Properties:
high UV resistance
high durability
lasting colours
resistance to temperatures up to 94°C
possibility of finished model machining
low odour emission compared to ABS
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
| Nozzle Temperature | 255-270°C |
| Bed Temperature | 90-110°C |
| Closed chamber | not required |
| Fan | 0-25% |
| Flowrate | 90-100% |
| Printing Speed | < 100 mm/s |
| Surface | glass, kapton tape, ABS juice |
| Retraction (direct) | yes, 1-2 mm |
| Retraction (bowden) | yes, 4-6 mm |
| Retraction Speed | 20-45 mm/s |
| Drying conditions | 80°C / 4h |
| Notes | When printing without a heated chamber, it is recommended to avoid exposing the model to gusts of wind/drafts |
| Print Surface | Material Properties | Bed Temp | Adhesives / Release Agents |
|---|---|---|---|
| Glass / Borosilicate Glass | Poor Adhesion | 90°C – 110°C | Magigoo Original recommended |
| Ceramic Glass | Poor Adhesion | 90°C – 110°C | Magigoo Original recommended |
| Textured PEI Glass | Good adhesion | 90°C – 110°C | Magigoo Original recommended |
| Smooth PEI Spring Steel Sheet | Poor Adhesion | 90°C – 110°C | Magigoo Original recommended |
| Textured PEI Spring Steel Sheet | Good adhesion | 90°C – 110°C | Magigoo Original recommended |
ASA and ABS can be smoothed with acetone vapor to provide a very smooth finish.
If ASA or ABS welds to your bed, you can use acetone to melt it off provided your print surface can take acetone.
Related products
-
SOLD OUTSunlu TPU Flexible – 0.5Kg filament weight
£16.00Out of stock. Join the waitlist to be notified when this product becomes available.
