Fiberlogy Easy PETG, 1.75, 0.85Kg
£19.20 £21.50
EASY PET-G combines the ease of printing with PLA and high strength comparable to that of the traditional PET-G. Printing with EASY PET-G is free from the deficiencies typical of printing with PET-G such as stringing or filament burning. EASY PET-G is available in opaque and transparent versions. Both forms offer a satisfying final effect in the form of an attractive looking top layer of the printouts.
Fiberlogy EASY PET-G will work great both for printing functional models and decorative elements.
Properties:
- ease of printing
- high durability
- low susceptibility to shrinkage and flossing
- resistance to acids, salts, alkaline substances
- odorless
APPLICATION IN 3D PRINTING:
END-USE PARTS: containers, holders
PROTOTYPES: bottles, packaging
ELECTRONICS: covers, cases, products containing diodes
DECORATIONS: lamps, glass-resembling elements
JEWELLERY: rings, necklaces, bracelets
Description
| Details | |
| Diameter | 1.75 mm |
| Diameter Tolerance | +/- 0.02 mm |
| Avg Roundness | + 0.01 mm |
| Net Weight | 0.85 kg |
| Printing | |
| Print Temperature | 220 – 250°C |
| Bed Temperature | 90°C |
| Closed chamber | not required |
| Printing Speed | < 100 mm/s |
| Fan | 0-25% |
| Surface | See table below |
| Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape. | |
| Print Surface | Material Properties | Bed Temp | Adhesives / Release Agents |
|---|---|---|---|
| Glass / Borosilicate Glass | Welds to glass | 60°C – 90°C | Magigoo Original needed |
| Ceramic Glass | Very good adhesion | 60°C – 90°C | Magigoo Original highly recommended |
| Textured PEI Glass | Good adhesion | 60°C – 90°C | Magigoo Original recommended |
| Smooth PEI Spring Steel Sheet | Welds to smooth PEI | 60°C – 90°C | Magigoo Original needed |
| Textured PEI Spring Steel Sheet | Good adhesion | 60°C – 90°C | Magigoo Original recommended |
Reviews (1)
5.00/51 review for Fiberlogy Easy PETG, 1.75, 0.85KgAdd a review
Only logged in customers who have purchased this product may leave a review.
cyberjak2k (verified owner) –
I’m normally a fan of eSun and Sunlu , but I must say the Fiberlogy Easy PETG is being an absolute pleasure printing on my Prusa i3 MK3S+
I got a some of the Orange ( traditional Prusa colour ) and the refill version in Black. and so far it’s printing beautifully with the stock settings for the material in Prusa slicer. That is the sign in my head of a great material. Just Load it up , select it, slice it, and send it!