Fiberlogy MattFlex 40D 1,75 mm 0,85 kg
£35.79
MattFlex 40D is a flexible filament that stands out from other rubber-like filaments due to its matte finish, which perfectly hides layer boundaries and gives the model a unique look. The ability to stretch up to 6 times and 50% compression combined with high impact strength, chemical and temperature resistance make it a very versatile material for many applications.
Fiberlogy MattFlex 40D is ideal for printing models exposed to frequent impacts, bending or twisting.
Properties:
- matte finish and low visibility of layers
- 40D Shore hardness
- very good thermal, chemical and abrasion resistance
- printing speed up to 60 mm/s
Description
| Nozzle Temperature | 210-230°C |
| Bed Temperature | 50-70°C |
| Closed chamber | not required |
| Fan | 50-75% |
| Flowrate | 105-110% |
| Printing Speed | < 60 mm/s |
| Surface | glass, masking tape |
| Retraction (direct) | 1-2 mm |
| Retraction Speed | 10-30 mm/s |
| Notes | To remove the print easier, it is recommended to heat the bed to 110°C |
Heating the print surface up to 110°C will help release the part
Extra care is needed to print flexibles due to its flexibility. A direct drive extruder is needed to print this material effectively.
Shore Hardness Scale
Below is a scale to give you an idea about Shore Hardness when selecting the right material.
Related products
-
SOLD OUTFiberlogy BVOH, Soluble Support Material, 1.75mm, 0.5Kg.
£67.00Out of stock. Join the waitlist to be notified when this product becomes available. -
SOLD OUTSunlu TPU Flexible – 0.5Kg filament weight
£16.00Out of stock. Join the waitlist to be notified when this product becomes available.
