If it says in stock, it's in stock in the UK
Superfast DPD Next Day and Weekend Delivery
Call Us! - Tel: 0121 818 0156
Free UK Delivery On Orders Over £40
See Shipping Policy
Live Web Chat - No Robots!
Details are important. Especially if you need to print very precise models or sculptures. If this is your goal, PLA Mineral, a material that resembles plaster, will be very helpful. This special feature, combined with the precision of the prints, allows it to be used in architectural and art studios and in detailed prototyping.
MODELS: buildings, structures, land development projects, interiors
DECORATIONS: statues, sculptures, reliefs
MODELING: small elements requiring high precision
PROTOTYPES: concept models, small parts
satin surface thanks to the addition of chalk
very good printing precision
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
|Closed chamber||not required|
|Printing Speed||35-60 mm/s|
|Surface||glass, masking tape|
|Retraction (direct)||2-3 mm|
|Retraction (bowden)||4-6 mm|
|Retraction Speed||20-45 mm/s|
|Drying conditions||50°C / 4h|
|Print Surface||Material Properties||Bed Temp||Adhesives / Release Agents|
|Glass / Borosilicate Glass||Good adhesion||50°C – 70°C||Not needed|
|Ceramic Glass||Good adhesion||50°C – 70°C||Not needed|
|Textured PEI Glass||Good adhesion||50°C – 70°C||Not needed|
|Smooth PEI Spring Steel Sheet||Good adhesion||50°C – 70°C||Not needed|
|Textured PEI Spring Steel Sheet||Good adhesion||50°C – 70°C||Not needed|
Only logged in customers who have purchased this product may leave a review.